Product Center

Home " Product Center

AOC Palatal A 400-972 m-phenylene unsaturated polyester resin

Properties Brylon A 400-972 is a m-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Main applications Brylon A 400-972 is suitable for pipes, tanks, automotive parts, ships, counter molds and other molded products requiring high mechanical properties. It can be used in hand lay-up, winding, RTM, pultrusion, casting grid and other molding processes. Product Specification Performance Range Unit Test Standard Appearance Clear - TM 2265 Viscosity 23°C 400-550 mPa.s TM 2013 Acid Value 8-14 mgKOH/g TM 2401 Solids 55

Learn more "

AOC Atlac 430 ACT Pre-promoted Thixotropic Epoxy Bisphenol A Vinyl Ester Resin

Properties Atlac 430ACT is a styrene solution of a pre-promoted thixotropic epoxy bisphenol A vinyl resin with medium reactivity and medium viscosity. Main applications Atlac 430ACT can be used for fiberglass reinforced parts with excellent chemical resistance for better mechanical properties, e.g. storage tanks, containers and installations, corrosion protection, hydraulic engineering, repair of sewerage pipes, anticorrosive flooring, etc. Laminates made with Atlac 430ACT have excellent long-term heat resistance and high dynamic load carrying capacity.Atlac 430ACT is suitable for a variety of processes: hand gluing, spraying, winding and centrifugal casting.

Learn more "

AOC SYNOLITE 8388-P-1 Low Viscosity Pre-Promoted Thixotropic DCPD Type Unsaturated Polyester Resin

Chemical/Physical Properties Synolite™ 8388-P-1 is a low viscosity, pre-accelerated, promoted, thixotropic, moderately reactive DCPD polyester resin. LSE systems have been incorporated and Synolite™ 8388-P-1 is monomer amine free. Major Applications Synolite™ 8388-P-1 has been developed for hand lay-up and spray applications to produce high performance structural laminates. Key Properties Synolite™ 8388-P-1 combines good mechanical properties with optimal processability. The resin exhibits very good fiber wetting and impregnation properties. Due to low exotherm, good

Learn more "

AOC Synolite 0544-I-2 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties Synolite 0544-I-2 is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and medium reactivity. Main Applications Synolite 0544-I-2 has excellent mechanical properties, with elongation at break similar to most glass fiber reinforced materials, and can be used for structural parts where high mechanical properties are required. It is suitable for both hand lay-up and injection molding processes. 0544-I-2 has been certified by Lloyd's Register of Shipping as a marine resin. 0544-I-2 has been heat stabilized to withstand tropical temperatures and is suitable for use in hot water.

Learn more "

AOC Palatal P 61TV-956L Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties P 61TV-956L is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying processes. The resin contains a low styrene evaporator (LSE) and a color change indicator for the curing process. It has good wettability to glass fibers and excellent handling properties.P 61TV-956L has excellent mechanical properties and good water resistance. Main applications P 61TV-956L is widely used in hand lay-up and spraying processes. P 61TV-956L has low viscosity and very good wetting of glass fibers.P 61TV-956L

Learn more "

AOC Palatal® P61TV-956 N o-phenylene unsaturated polyester resin

Phthalic Resin for Hand Layup and Spraying Components based on Palatal P61TV-956 N have good non-stick properties and good curability when thin laminating in high humidity environments. Benefits Chemical/Physical Properties Palatal® P 61 TV-956 N is a pre-promoted, thixotropic unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. A color change system has been used. Application Palatal P61TV-956N is well suited for hand lay-up and spray processes. It quickly soaks in during the lay-up process.

Learn more "

AOC SYNOLITE 0175-N-1 Dicyclopentadiene Unsaturated Polyester Resin

Chemical/Physical Properties Synolite™ 0175-N-1 is an unsaturated polyester resin based on dicyclopentadiene designed for thermoforming and pultrusion applications. Typical applications for Synolite™ 0175-N-1 are in electrical engineering, construction and transportation. Key Properties The key properties of Synolite™ 0175-N-1 resin are optimum wetting of glass fibers, medium reactivity, good mechanical properties and a high HDT For best results with Synolite™ 0175-N-1, it is important to select the optimum curing system and processing temperature for the application. Delivery

Learn more "

AOC Palatal® A 400-972 m-Phenylunsaturated Polyester Resin for FRP Structural Layers

Isophthalic Polyester Resin for FRP Structural Layers Components based on Palatal® A 400-972 have excellent mechanical and electrical properties with good stiffness, dimensional stability and impact resistance. Benefits Chemical/Physical Properties Palatal® A 400-972 is an unsaturated polyester resin based on isophthalic acid and standard diols dissolved in styrene. The resin has medium viscosity and high reactivity. Main Applications / Main Properties Palatal® A 400-972 is suitable for a wide range of applications. Molded products made from this resin have excellent mechanical properties, high resistance to heat distortion, and high

Learn more "

AOC Palatal A 400-901 m-phenylene unsaturated polyester resin

Product Properties Brylon A 400-901 is a general-purpose m-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Main applications Brylon A 400-901 is suitable for casting products and FRP products requiring high mechanical strength and high temperature and corrosion resistance, and is used in artificial stone, handicrafts, gratings, pipes, ships, automobile parts, etc. It has low fracture sensitivity and high fatigue life. The products have low fracture sensitivity and thus have high fatigue life. It is especially suitable for products in contact with water, especially seawater. It has high resistance to water and chlorine. The main molding processes are hand-layup, winding, casting grid and pultrusion. Product Specification Performance Indicator Range Unit Test Standard Appearance

Learn more "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.