Prepreg Series

Introduction WP-R1312 is a 125°C curing epoxy resin system of Wells Advanced Materials (WAM), which is capable of achieving an optimal balance of static properties (flexural/compressive strength and elasticity) and dynamic properties (impact strength, fatigue properties). It is widely used in the manufacture of tubing products such as arrow shafts, camera tripods, fishing rods, golf clubs, and similar high-performance sporting goods. Its viscosity and tackiness are well suited for prepreg processes, and its application characteristics (viscosity and softness) vary little with temperature.WP-R1312 can be stored for four weeks at ambient temperature and for one year at -18°C. It can be used in a wide range of applications, such as archery shafts, camera tripods, fishing rods, golf clubs, and similar high performance sporting goods. Features and Benefits Recommended Application Processes and Applications

Introduction WP-R5600W3K WAMmax (WAM) high transparent epoxy resin system, the products have a beautiful appearance, no white spots, used in the appearance and performance requirements of the higher automotive exterior parts and other similar manufacturing areas.WP-R5600W3K resin flow and viscosity are very suitable for the prepreg process, and with the change in temperature, the use of the characteristics (viscosity and softness) of the difference is small. The resin can be stored at room temperature for four weeks and at -18°C for one year. Features and Advantages Recommended Application Processes and Applied Products Reference Curing Conditions Molding Conditions: Adjusted according to product size, heat transfer, and molding method.

Introduction WP-L5100 belongs to Wells Advanced Materials' (WAM) fast curing epoxy resin system for applications such as bicycle parts, helmets, shoe soles, and marine products. Its viscosity and tackiness are very suitable for prepreg process, and there is little difference in its application characteristics (viscosity and softness) with temperature change.WP-L5100 can be stored at room temperature for three weeks, and can be stored at -18℃ for four months. Features and Benefits Recommended Application Processes and Application Products

Introduction WP-S5000 is a 125°C curing epoxy resin system from WAM, which has a low resin loss rate and excellent impact resistance. It is widely used in the manufacture of bicycles, hockey sticks, tennis rackets, golf clubs and other similar high performance sporting goods. Its viscosity and adhesion are very suitable for prepreg operation process. Differences in application characteristics (viscosity and softness) are minimal with changes in temperature.WP-S5000 can be stored for four weeks at ambient temperature and one year at -18°C. It can be used in a wide range of applications, including the manufacture of bicycles, hockey sticks, tennis rackets, golf clubs and similar high performance sporting goods. Features and Benefits Recommended Application Processes and Application Products Reference Curing Conditions Molding Conditions: Adjustment is required according to the thickness of the product, heat transfer, and molding method.

Introduction WP-S3000 is a 125°C curing epoxy resin system from WAM that provides an optimal balance of static (flexural/compressive strength and elasticity) and dynamic (impact strength, fatigue properties) properties. It is widely used in the manufacture of bicycles, hockey sticks, tennis rackets, golf clubs, and other similar high-performance sporting goods. By adjusting the fluidity of the resin, adhesion and softness compatible with the prepreg operation process are obtained. Differences in application characteristics (viscosity and softness) are minimized with changes in temperature, and WP-S3000 can be stored for four weeks at ambient temperature and one year at minus 18℃. Features and Advantages Recommended

WP-H1655 is a heat-resistant epoxy resin system from WAM. WP-H1655 is suitable for bicycle rims, automobile exhaust pipes, and a variety of industrial applications that require heat resistance. It is suitable for the blow molding technique for bicycle rims with appropriate resin fluidity, and the molded products have good surface quality. Depending on the characteristics of the customer's equipment, it can be molded in a wide range of conditions from 125 to 175°C, and heat resistance can be maximized by independent post-curing (demolding) if necessary. Features and Advantages Recommended Application Processes and Products Reference Curing Conditions 125℃1.5h+175℃2h

Curing condition: 160℃*2h Tg: >150℃ Halogen: Halogen free Flame retardant grade: EN45545 R1 HL3 Suitable process: Blow molding, hot press can.

Curing condition: 120℃*1h Tg: >115℃ Halogen: Halogen free Flame retardant grade: DIN5510-2 Suitable process: molding, hot pressing cans.

Curing condition: 160℃*5min Tg: >110℃ Halogen: Halogen free Flame retardant grade: UL94V0 Suitable process: blow molding, hot press can.