Wind Power Series

It is used in the manufacture of various high-performance composite molds. ML-5419 Values Remarks References Standards Mixing viscosity 25℃＜350 [mPa-s] Pouring body GB/T 22314-2008 Tg ≥110 ℃ GB/T 19466.2-2004 Bending strength ＞110 MPa GB/T 1447-2005 Curing conditions 25℃×24h+100℃×3h or 50℃×6-8h+100℃ ×3h Color Colorless, yellowish or blue. ×Color Colorless, yellowish or blue.

General-purpose vacuum infusion system for wind power blades, ship and yacht manufacturing, automobile hulls, etc. TLC-6010 Values Remarks References Standards Mixing viscosity 25℃ 120-220 MPa Pouring body GB/T 22314-2008 Tg ≥75 ℃ GB/T 19466.2-2004 Bending strength ≥100 MPa GB/T 1447-2005 Curing condition 25℃×24h or 60℃×3h+80℃×6h Color Colorless, slightly yellow or colorless, yellowish or blue

General-purpose vacuum infusion system for wind power blades, ship and yacht manufacturing, automobile hulls, etc. LT-5093 Values Remarks References Standards Mixing viscosity 25℃ ≤250[mPa-s] Pouring body GB/T 22314-2008 Tg ≥75 ℃ GB/T 19466.2-2004 Flexural strength ≥100 MPa GB/T 1447-2005 Curing condition 50℃×6h Color Colorless or yellowish

Applied to various composite material products hand lay-up process, such as wind turbine blades, yachts and other products of the overall structure of the parts, shells and other manufacturing and reinforcement. Fast low temperature curing, low temperature within 24h to reach 60% curing degree, can be sanding, load bearing and other operations. Fast and slow curing agents can be used freely with each other to achieve the required speed. Winter and summer resin formulations minimize the effect of temperature changes on viscosity. Certified by Germanischer Lloyd (GL). LT-5089 Values Remarks Cited Standards Mixing Viscosity 25℃ 800-2000cps Pouring Body GB/T 2231

General-purpose vacuum infusion system, GL certified product, suitable for wind turbine blades, ship and yacht manufacturing, automobile hulls, etc. LT-5088 Values Remarks References Standards Mixing viscosity 25℃ 200-300 [mPa-s] Pouring body GB/T 22314-2008 Tg ≥70℃ GB/T 19466.2-2004 Flexural strength ≥100MPa GB/T 2567-2008 Curing condition 50℃×4h+75℃×6h Color Colorless or yellowish

General-purpose vacuum infusion system, Germanischer Lloyd (GL) certified products, suitable for wind power blades, ship yacht manufacturing, automobile hulls and so on. LT-5078 Values Remarks References Standards Mixing Viscosity 25℃200-300cps Pouring Body GB/T 22314-2008 Tg 75-85℃ GB/T 19466.2-2004 Bending Strength 100-120MPa GB/T 2567-2008 Curing Condition 50℃×4h+70℃×6h Colors Blue Transparent