BMC

AOC Palapreg P 104-02 Bisphenol A Vinyl Ester Resin for SMC/BMC

Product Properties P 104-02 is a bisphenol A vinyl resin that has been dissolved in styrene. Hyakusai P 104-02 has high reactivity and medium viscosity. Main Applications Hyakusyna P 104-02 is specially developed for SMC/BMC. It has low heat distortion and high toughness, and has excellent chemical and heat resistance. Brylonite P 104-02 is particularly suitable for automobile engine parts. The resin can be thickened with magnesium oxide. Product Specification Performance Range Unit Test Standard Appearance Clear - TM 2265 Viscosity 23°C 900-1100 mPa

Learn more "

AOC Palapreg H 814-902 Low Shrinkage Additive for SMC/BMC

Product Properties Brylon Mate H 814-902 is a low shrinkage additive for SMC / BMC, which belongs to the modified polystyrene type. It has high impact resistance, excellent color compatibility, gloss and certain heat/weather resistance. Main Applications Brylon Mate H 814-902 is mainly for SMC/BMC products with low shrinkage type (shrinkage >0.08%). It can effectively reduce the cracking of products. Electronic and electrical appliances: coloring products, products requiring impact and mechanical properties Automotive parts: truck bumpers, truck sunroof visors, wing panels Other products: general requirements SMC/BMC products Product specifications Performance range Units Test standards

Learn more "

AOC Palapreg® P 145-01 Pure Unsaturated Polyester Resin with Maleic Acid

Pure Unsaturated Polyester Resin with Maleic Acid for Low Shrinkage Applications Palapreg® P 145-01 is intended for SMC and BMC production. It has good compatibility with low-profile additives and can be used in low-shrinkage SMC/BMC applications for very good surface quality. Molded parts made with Palapreg® P 145-01 show excellent uniform coloration. Advantages Main areas of application Construction and infrastructure, electrical, transportation. Product Specification Attributes Values Units TM Appearance Clear - 2265 Solids 65.5 - 67.

Learn more "

AOC Palapreg P18-03 SMC/BMC Molding Resin

Chemical/Physical Properties Palapreg P18-03 is an unsaturated polyester resin derived from maleic acid and glycol, dissolved in styrene. The resin has medium viscosity and high reactivity. Primary Applications Palapreg P18-03 is recommended to be formulated with high polymer solutions (e.g., Palapreg H850-01, H852-03, Palapreg H 1080-01, etc.) for the production of low protrusion and Class A applications, as well as high quality, low shrinkage (H814-01) SMC/BMC parts. Formulations based on P18-03 can be used in a wide range of applications with high surface quality, low separation and modified

Learn more "

AOC PALAPREG® P 17-02 Low Bump Float SMC/BMC Molding Resin

Chemical/Physical Properties Palapreg® P 17-02 is an unsaturated polyester resin derived from phthalic acid and standard ethylene glycol, dissolved in styrene. Palapreg® P 17-02 has medium viscosity and high reactivity. Main applications Palapreg P 17-02 is used in the production of SMC and BMC. It is mainly used with Palapreg polymer components for SMC/BMC applications with low shrinkage or low bulging. The resin is easy to thicken easily by magnesium oxide. Product specification as delivered Attributes Range Units Test method Viscosity, 23°C 1300 &#

Learn more "

AOC PALAPREG® H 852-03 Low Shrinkage Additive for SMC/BMC with Low Surface Bump Float Grade A

Chemical/Physical Properties Palapreg® H 852-03 is a modified saturated polyester solution dissolved in styrene. Main applications For example, the combination of Palapreg® P18-03 and Palapreg® H852-03 is recommended for the production of low relief SMC/BMC parts with high surface quality (class A). The formulation can be easily thickened with magnesium oxide. Due to its excellent flowability in SMC, Palapreg® H 852-03 is well suited for low pressure applications. The use of aluminum hydroxide as a filler allows the production of molded products with high flame retardancy. Criteria Comments

Learn more "

AOC Palapreg H 892-02 Low Shrinkage Additive for SMC/BMC with Grade A Surface

Product Properties Brylon H 892-02 is a low shrinkage additive for Grade A surface SMC / BMC. It has very low resin viscosity and excellent system shrinkage control. Main Applications H 892-02 is well suited for A-grade surface products or products with high surface brightness. Shrinkage can be controlled to zero or negative, making it suitable for a wide range of products that require shrinkage or surface quality. At the same time, H 892-02 has very good heat resistance, water resistance and weather resistance, which can meet the requirements of some special products. Automobile parts: all kinds of automobile exterior parts Electronic and electrical appliances: motor molded parts, precision injection parts Others:

Learn more "

AOC Palapreg® P 133-952 High Gloss Surface SMC/BMC Molding Resin

Palapreg® P 133-952 is a maleic anhydride type unsaturated polyester resin with an excellent surface finish. It is mainly used for products requiring surface quality and gloss, as well as good water/weather resistance. Examples include bathroom products, automotive panels and medical devices. Characteristics and Properties Typical Applications Palapreg® P 133-952 is a resin designed for low-profile and Class A surface SMC formulations. In combination with low shrinkage additives for Class A surfaces, such as H 892-02, high surface quality molded products can be achieved. Product Specifications Performance Values Single

Learn more "

AOC Palatal® EL-901 Saturated Polyester SMC/BMC Low Shrinkage Additive

Low shrinkage additive for saturated polyester type SMC/BMC Palapreg® EL-901 is a special low shrinkage additive for SMC/BMC with A-grade surface. The shrinkage of the product can be controlled to zero or negative shrinkage, which is suitable for all kinds of products that require shrinkage or surface quality. Characteristics and Properties Typical Applications Palapreg® EL-901 is ideally suited for Grade A surface products or products with high surface brightness. Palapreg® EL-901 has excellent heat, water, and weather resistance, and is suitable for a wide range of products that require zero or negative shrinkage or surface quality.

Learn more "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.

en_USEnglish