- Molecular Formula: C12H24O3
- Molecular Weight: 230.3
- Active Oxygen Content: 6.74–6.95%
- Appearance: Clear liquid
- Color: Within 50 Pt-Co / APHA
- Hydrogen peroxide content (calculated as TBHP): ≤ 0.099%
- Inorganic + Organic Hydrolyzable Chlorine: ≤ 150 mg/kg
- Density (20°C): 0.900 g/cm³
- Viscosity (20°C): 5 mPa·s
- 0.1 hour: 135°C
- 1 hour: 114°C
- 10 hours: 94°C
- Self-Accelerating Decomposition Temperature (SADT): 55°C
- As an initiator for polymerization reactions, particularly under high-temperature and high-pressure conditions.
- Suitable for the polymerization of ethylene, acrylates, and methacrylates, particularly in coatings production.
- Can be used in styrene polymerization or copolymerization.
- Suitable for the preparation of thermosetting composites.
- Used in hot-press molding formulations, such as SMC, DMC, BMC, etc.
- Standard packaging is 30-liter HDPE drums or 25-kilogram peroxide solutions.
- Maximum storage temperature: 25°C
- Minimum storage temperature: -20°C
- Keep containers tightly closed and store in a dry, well-ventilated area, away from heat sources, ignition sources, and direct sunlight.
- Avoid contact with reducing agents (such as amines), acids, bases, and heavy metal compounds (such as accelerators, driers, and metal soaps).
- Refer to the Safety Data Sheet (SDS) for detailed information on safe storage, use, and handling.
- Carbon dioxide, methane, tert-butanol, acetone, 2-tert-butoxy-2,4,4-trimethylpentane