WAM

WP-H1655 is a heat-resistant epoxy resin system from WAM. WP-H1655 is suitable for bicycle rims, automobile exhaust pipes, and a variety of industrial applications that require heat resistance. It is suitable for the blow molding technique for bicycle rims with appropriate resin fluidity, and the molded products have good surface quality. Depending on the characteristics of the customer's equipment, it can be molded in a wide range of conditions from 125 to 175°C, and heat resistance can be maximized by independent post-curing (demolding) if necessary. Features and Advantages Recommended Application Processes and Products Reference Curing Conditions 125℃1.5h+175℃2h

Curing condition: 160℃*2h Tg: >150℃ Halogen: Halogen free Flame retardant grade: EN45545 R1 HL3 Suitable process: Blow molding, hot press can.

Curing condition: 120℃*1h Tg: >115℃ Halogen: Halogen free Flame retardant grade: DIN5510-2 Suitable process: molding, hot pressing cans.

Curing condition: 160℃*5min Tg: >110℃ Halogen: Halogen free Flame retardant grade: UL94V0 Suitable process: blow molding, hot press can.

Introduction WP-B1268 is a low-temperature curing epoxy resin system of Wyber New Materials (WAM), compounded by epoxy resin and special curing system, with good resin process operability and high mechanical properties, mainly used in the preparation of large-scale composite structural parts in carbon fiber automobile, wind power, high-speed rail, aerospace and aviation fields. Features and advantages Prepreg process Reference curing conditions Recommended molding curing conditions at atmospheric pressure Actual curing time is related to pressure, fiber/resin shape, thickness, and heat transfer fast and slow

Product Description: Model No.: WP-R1200 Application: Standard epoxy resin for prepreg Features: 125°C curing epoxy resin system for mold molding and pipe (e.g., golf clubs, fishing rods) Curing and Storage: Curing conditions: mold molding 90-30 minutes (120-150°C), pipe molding 30 minutes (80°C) + 90 minutes (125°C) Storage life: 3 months to 1 year at 0-18°C, 4 weeks at 25°C

WP series resins WAMPlus (WAM) 125 ℃ curing epoxy resin Applications: ● Coil molding: fishing rods, golf clubs, archery shafts, camera tripods, sticks and other tubing products Product Characteristics: 1. Standard general-purpose medium fluidity Resin Mechanical Properties: Test Items Test Methods Unit WP-R1200 WP-R2300 WP-R5600 Bending Strength ASTM D790 MPa(psi) 142(2.06×104) 140(2.03×1) D790 MPa (psi) 142 (2.06×104) 140 (2.03×1)

Introduction WP-S1000 is a 125°C curing hot melt epoxy resin system from WAM. WP-S1000 resin has good flowability and can be used to make products with low porosity and high fiber content, making it ideal for the preparation of fishing rods, golf clubs, archery sticks, camera tripods, tubes, etc. WP-S1000 resin also has a viscosity that is suitable for the reeling process. Ideal for the preparation of fishing rods, golf clubs, arrow shafts, camera tripods, tubing, etc. WP-S1000 resin also has the viscosity, stickiness, and softness suitable for the tube reeling process, with optimum production maneuverability, and can be stored at room temperature for about four weeks. Features and Advantages Recommended Application Processes and Products ※ WP-S1000 is not suitable for inflatable compression molding, molding, and hot press can molding, and WP-S1000 is recommended for these three processes.