1338-23-4

AKPEROX ER33 is used to cure unsaturated polyester (UP) resins at room and elevated temperatures in the presence of cobalt accelerators. (e.g. AKCOBALT 1% - 6%) The AKPEROX ER33 + cobalt accelerator combination provides faster curing than AKPEROX A50. The setting time of AKPEROX ER33 is faster than both AKPEROX A50 and AKPEROX ER34. It is particularly suitable for pipe production and continuous manufacturing applications with high production rates, such as continuous lamination, RTM, centrifugal casting, filament winding.

AKPEROX ER11 is a phthalate-free mixture of two ketone peroxides (MEKP and AAP) for curing unsaturated polyester resins with cobalt accelerators at room temperature. Compared to cobalt peroxides (MEKP), AKPEROX ER11 with cobalt accelerators provides faster curing speeds and higher peak temperatures at room or elevated temperatures (40-80°C).

AKPEROX CMP75 is a liquid polymerization initiator for room temperature curing that offers the advantages of slower gelling time, better final cure and lower impurity levels than MEKP.

AKPEROX CMP50 is a liquid polymerization initiator for room temperature curing that offers the advantages of slower gelling time, better final cure and lower impurity levels than MEKP.

AKPEROX A9LP is a multi-purpose catalyst designed to promote room temperature curing of unsaturated polyester resins. Resins can be heat cured with AKPEROX A9LP over a temperature range of 100-127˚C.

AKPEROX A9H is a general purpose MEKP for curing unsaturated polyester (UP) resins at room temperature. It is generally used as an accelerator in combination with metal salts.

AKPEROX A9CL is a multi-purpose catalyst designed to promote room temperature curing of unsaturated polyester resins. Resins can be heat cured with AKPEROX A9CL over a temperature range of 100-127˚C.

AKPEROX A6R is a phthalate-free MEKP for curing unsaturated polyester (UP) resins at room and elevated temperatures in the presence of cobalt accelerators. It is suitable for general purpose applications. Recommended for the production of composites such as buttons, water tanks, etc. that come into direct contact with the human body without the Phthalate Free specialty.

AKPEROX A50G is a general purpose MEKP for curing unsaturated polyester (UP) resins at room temperature. Typically used as an accelerator with metal salts for curing gelcoat resins, laminates (coatings), vinyl esters, fibers, buttons, coatings and cast polyester resins, as well as for FRP pipe production. Liquid Particularly suitable for gelcoat applications with low water content. (e.g. production of marine applications, cabinets, etc.)