- Name: NOROX® CHM-50 RED
- CAS Number: 80-15-9
- NOROX® CHM-50 RED is a solution based on cis-isopropylbenzene peroxide that contains an accelerator. It is a liquid polymerization initiator used to cure vinyl ester resins at room temperature and offers the following advantages and characteristics:
- Moderate peak exothermic heat release, typically lower than that of methyl ethyl ketone peroxides (MEKPs).
- Moderate gel time in vinyl ester resins.
- Excellent final cure quality.
- Low impurity levels (water, hydrogen peroxide, salts, etc.).
- No gas generation.
- Red color: The uniformity of the color in the resin can be controlled, and the color is retained in the product after curing.
- Appearance: Red liquid
- Active oxygen (AO): approx. 4.5% w/w
- Density @ 20°C: approx. 1.04 g/cm³
- Flash point: approx. 60°C
- Critical Temperature (SADT): Approx. 60°C
- Recommended storage temperature: Up to 30°C; for maximum shelf life, do not exceed 25°C
- Storage stability from the date of delivery: 6 months
- 5 kg (8 lb) and 25 kg (40 lb) HDPE drums
- The information contained herein and any further technical advice that United Initiators may provide reflect our current knowledge and experience regarding our products and applications, based on our internal research and development. United Initiators makes no warranty regarding the specific product properties, suitability for particular applications, or the completeness of the usage instructions provided.
- Furthermore, United Initiators makes no warranty regarding the product’s properties or shelf life. United Initiators assumes no liability for the use of the information provided, including aspects related to existing third-party intellectual property rights, particularly patent rights.
- We reserve the right to make any changes based on technical progress or further developments. The use of our products based on our technical recommendations is beyond our control and is strictly at the user’s own risk; the user is responsible for carefully inspecting and testing the purchased products to verify their suitability for the intended application.
- NOROX® CHM-50 RED is an excellent liquid polymerization initiator for room-temperature-curing novolak epoxy ethyl ester resins, enabling the curing reaction to proceed within a reasonable timeframe without gas generation. Its gel time and peak time are longer than those of MEKP products (e.g., NOROX® ENP-102).However, the hardness of the fully cured resin is typically superior to that of resins initiated with MEKPs. After curing, styrene emission levels are generally lower than those of MEKPs.
- Potentially detectable decomposition products: ethylbenzophenone, cis-isopropanol
- Avoid exposure to heat, light, and moisture, and protect the product from contaminants. Store within the safe temperature range.