- Product Name: EHPC-60-ENF2
- Chemical Composition: 1,1-Bis(2-ethylhexyl) peroxydicarbonate
- Form: White (non-freezing) emulsion
- Application: Used as a free-radical initiator for monomer polymerization, primarily for the polymerization of vinyl chloride (VCM).
- Appearance: White emulsion
- Inhibitors: Water/methanol
- Content: Approximately 60% w/w
- Active Oxygen (AO): Approximately 2.77% w/w
- Density (20°C): approx. 0.98 g/cm³
- Viscosity (20°C): approximately 200 mPa·s
- Flash point: 31°C
- Critical Temperature (SADT): approx. 0°C
- Refrigerated stability: approximately -25°C
- Recommended storage temperature: -20°C
- Maximum shipping temperature: -20°C
- Storage stability after delivery: 3 months
- Standard packaging: 1,100 kg in stainless steel IBCs
- Initiator for suspension and microsuspension polymerization of vinyl chloride (VCM).
- Temperature range: 45–60°C
- Dosage Level: 0.05–0.2%
- Advantages: Liquid form, easy to dose, and highly active.
- Use in combination with other thermally stable peroxides (e.g., decanoyl peroxide) to achieve a constant polymerization rate.
- Potentially detectable decomposition products: carbon dioxide, 2-ethylhexanol
- Avoid heat sources, light, and humidity; protect the product from contamination by impurities.
- Keep within safe temperature limits.
- This information is based on United Initiators’ internal research and development and experience and is provided for reference only.
- United Initiators makes no express or implied warranties regarding the information provided, including specific product properties, suitability, or complete instructions for use.
- United Initiators makes no warranty regarding the product’s properties or shelf life and assumes no responsibility for the legality of the use of this information.
- United Initiators reserves the right to make any changes based on technical progress or further developments.
- The application and use of products based on technical recommendations are beyond the control of United Initiators and are the sole responsibility of the user. Users are obligated to carefully inspect and test the products they receive to verify their suitability.