- This product is a 75% solution of 1,1-tert-butylperoxy-3,3,5-trimethylcyclohexane, demineralized using high-boiling-point alkanes.
- The product is used as an initiator for the polymerization of monomers (such as styrene) as well as for the curing and polymerization of unsaturated polyester resins.
- Appearance: Colorless liquid.
- Peroxide Content: Approximately 75%.
- Active oxygen content: approximately 7.94%.
- Deactivator: High-boiling-point aliphatic hydrocarbons.
- Density: Approximately 0.88 g/cm³.
- Viscosity: approximately 8 mPa·s.
- Refractive index: approximately 1.435.
- Critical temperature (SADT): approximately 60°C.
- An initiator for the high-pressure polymerization of ethylene, with an operating temperature range of 200–250°C.
- A polymerization initiator for styrene, with an operating temperature range of 100–140°C.
- It can also be used for the polymerization of other monomers, such as vinyl acetate and methacrylate.
- The product is typically shipped in 25-liter HDPE drums.
- The recommended storage temperature is below 30°C.
- This product is classified as a hazardous chemical and must be stored and handled in accordance with the requirements in the Safety Data Sheet.
- Product information is based on internal testing and does not constitute a warranty of product characteristics or instructions for use.
- It is the user’s responsibility to inspect and test the product to verify its suitability.