Nouryon Perkadox PD-50S-PS Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Home " Product Center " Nouryon " Perkadox " Nouryon Perkadox PD-50S-PS Di(2,4-dichlorobenzoyl)peroxide 133-14-2

model number	quantity contained	Suitable process and crosslinking temperature	Dosage %	characterization
Perkadox PD-50S	50%	Extrusion, hot air vulcanization 90°C	0.8-1.4	Good anti-yellowing, high transparency of products, less additive: less spraying, less odor, suitable for the production of high transparent extruded products.
Perkadox OPC-50S	50%	Extrusion, hot air vulcanization 90°C	0.8-1.4	Good anti-yellowing, high transparency of products, less additive: less spraying, less odor, suitable for the production of high transparent extruded products.
Perkadox OPC-50S-MM	50%	Extrusion, hot air vulcanization 90°C	1.0-1.8	A mid-range product, suitable for extruded products with slightly higher transparency requirements.
Perkadox OPC-50S-LM	50%	Extrusion, hot air vulcanization 90°C	1.0-1.8	Inexpensive, low cost, suitable for the production of wires or extruded products that do not require high transparency.

Product Information::

Product Name: Perkadox PD-50S-PS
Chemical composition: Di(2,4-dichlorobenzoyl)peroxide
Molecular weight: 380.0
CAS No. 133-14-2
EINECS number: 205-094-9
Active oxygen content: 4.21%
Content: 49.0% - 51.0%
Appearance: gray-white uniform paste

use::

Perkadox® PD-50S-PS is mainly used for crosslinking silicone rubber.
Silicone rubber containing Perkadox® PD-50S-PS can be crosslinked without external pressure, such as hot air or/and infrared vulcanization.
It can be easily mixed with silicone rubber in a two-drum mixer.
The recommended safe processing temperature (rheometer ts2 > 20 minutes) is 65°C and the typical cross-linking temperature (rheometer t90 approx. 12 minutes) is 90°C.

thermal stability::

Organic peroxides are thermally unstable and self-accelerating decompositions.
Self-accelerating decomposition temperature (SADT) of 140°F (60°C).
Store at a maximum temperature of 86°F (30°C).

decomposition product: The major breakdown products include carbon dioxide, 1,3-dichlorobenzene, 2,4-dichlorobenzoic acid, and traces of 2,2′,4,4′-tetrachlorobiphenyl.

Security and handling::

Perkadox® PD-50S-PS is classified as "Reproductive Toxicity, Category 1B".
When storing and handling, keep container tightly closed, out of direct sunlight and away from heat or ignition sources.
Avoid weighing and dispensing in the storage room, exposure to reducing agents, acids, bases and heavy metal compounds.

statement denying or limiting responsibility::

Users must determine for themselves in advance, through testing or other means, whether the Products are suitable for their intended use.

Di(2,4-dichlorobenzoyl)peroxide CBPO 133-14-2

Di(2,4-dichlorobenzoyl) peroxide Trade name: Initiator CBPO English name: Di(2,4-dichlorobenzoyl) peroxide Chemical name: Di(2,4-dichlorobenzoyl) peroxide Chemical structure formula: Molecular formula: C14H6O4Cl4 Molecular Weight: 380.0 Theoretical reactive oxygen content: 4.21% CAS No. : 133-14-2 UN No. 3106 Einecs : 205-094-9 Main decomposition products: CO2, 1,3-dichlorobenzene, 2,4-dichlorobenzene, trace

Read More "

Enox DCBP Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Chemical name: Di(2,4-dichlorobenzoyl)peroxide, 50% paste CAS-No: 133-14-2 Introduction: Enox DCBP is a white and slightly yellow paste, is a diacyl organic peroxide. It is a diacyl organic peroxide. It is used as vulcanizing agent for extruded silicone rubber with high strength and good transparency. Reference crosslinking temperature and dosage (depending on different rubber and product requirements): temperature> 90 ℃; dosage: 1 ~ 2.5%. Safety data Thermal decomposition temperature: 60 ℃ United Nations No. (UN-No): 3106 China Hazardous Chemical No. (CN-No): 52048 Physical and chemical properties State: white paste Specific gravity: about 1

Read More "

United Initiators DCLBP-50-PSI Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Product Information: Product Name: DCLBP-50-PSI (di(2,4-dichlorobenzoyl) peroxide) CAS No.: 133-14-2 Content: 50% Paste (in Silicone Oil) Molecular Mass: 380.0 g/mol Appearance: White Paste Main Ingredients: Approx. 50% Di-(2,4-dichlorobenzoyl) peroxide, desensitized by Silicone Oil Application: Used as initiator for crosslinking of polymers, especially silicone rubber (VMQ) Technical Data: Appearance: White paste Peroxide content: approx. 50% w/w Reactive oxygen species: approx. 2.10% w/w Desensitizer: Silicone oil Density (20°C): approx. 1.2

Read More "

Nouryon Perkadox OPC-50S-PS Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Model No. Content Suitable for process and cross-linking temperature Dosage % Characteristics Perkadox PD-50S 50% Extrusion, hot air vulcanization 90℃ 0.8-1.4 Good anti-yellowing, high transparency, less additive: less frosting, less odor, suitable for the production of high transparent extruded products. Perkadox OPC-50S 50% Extrusion, hot air vulcanization 90℃ 0.8-1.4 Good anti-yellowing, high product transparency, less additive: less frosting, low odor, suitable for producing high transparent extruded products. Perkadox OPC-50S-MM 50%

Read More "

Nouryon Perkadox OPC-50S-PS-LM Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Read More "

Nouryon Perkadox OPC-50S-PS-MM Di(2,4-dichlorobenzoyl)peroxide 133-14-2

Read More "

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have experience in exporting hazardous chemicals, including Class 5.2 Dangerous Goods with Cold Chain Transportation Products, Class 3 Dangerous Goods and Class 9 Dangerous Goods, etc., and have exported to the United States of America, Russia, Turkey, India, Ukraine and other countries.

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.