- Product Name: NOROX® FS-100/9
- Chemical Composition: Methyl ethyl ketone peroxide (MEKP)
- Main Applications: Primarily used in highly filled resin systems, it has a high hydrogen peroxide content and provides rapid gelation and early strength development. Not recommended for use with gelatin coatings or vinyl ester resins.
- Active Oxygen Content: Not to exceed 9.0%
- Appearance: Liquid
- Color: Colorless and transparent
- Specific gravity at 25°C: 1.16
- Flash point (C.O.C.): Not less than 200°F/93°C
- Flash point (SETA C.C.): Not less than 170°F/76°C
- Spontaneous Decomposition Temperature (SADT): 140°F (60°C)
- Moderately soluble in: esters
- Soluble in: ketones, lower alcohols, ethers
- Slightly soluble in: hydrocarbon solvents and water
- Used as a curing initiator for room-temperature-curing polyester resins; exhibits excellent reactivity
- Flame-retardant; self-extinguishing at low temperatures; does not exhibit the accelerating properties of organic peroxides when heated above the flash point
- Suitable for most polyester resins; provides very rapid gelation and normal curing even in thick sections
- Standard packaging sizes: 4x8-pound and 44-pound (20-kilogram) polyethylene bottles
- NOROX® FS-100/9 is available in pre-colored 44-pound (20 kg) bottles
- The information and technical recommendations provided in this document are based on internal testing and are intended to inform interested parties about our products and their potential applications. This information should not be construed as a guarantee of specific product properties or their suitability.
- We reserve the right to make any changes in light of technological advancements and business developments.
- We assume no liability for the intellectual property rights of third parties, as required by law.
- The use and application of our products based on our application recommendations are beyond our control and are the sole responsibility of the user. The user is obligated to verify that the product is suitable for its intended use.