- Product Name: NOROX® ENP-90
- Chemical Composition: Methyl ethyl ketone peroxide (MEKP)
- Appearance: Colorless, transparent liquid containing a methyl ethyl ketone-based peroxide, demetallized with fatty esters. This ketone peroxide is used as an initiator (radical source) in the curing of unsaturated polyester resins.
- Main Applications: Used in conjunction with cobalt accelerators for the curing of molded parts at room temperature.
- Advantages: Highly effective in specific pre-accelerated and stabilized resin types.
- Appearance: Colorless, transparent liquid
- Active oxygen content: 8.6–9.2%
- Flash point (Seta closed-cup method): > 77°C
- Density (20°C): 1.01 g/cm³
- Viscosity at 20°C: 13 mPa·s
- Soluble in: Oxidizing organic solvents
- Insoluble in: water
- Critical temperature (SADT): 60°C
- Recommended storage temperature: Not to exceed 30°C
- Shelf life at 30°C: 6 months from the date of shipment
- NOROX® ENP-90 must not be mixed or diluted with phthalates (such as dimethyl phthalate or diisobutyl phthalate).Suitable for hand lay-up, spray-up, RTM, continuous lay-up, centrifugal casting, fiber winding, polyester concrete, button manufacturing, and vacuum impregnation, among others.
- NOROX® ENP-90 exhibits consistent room-temperature performance in resins and gelatin.
- Standard packaging: 22.5-kilogram polyethylene bottles.
- The information and technical recommendations provided in this document are based on internal testing and are intended to inform interested parties about our products and their potential applications. This information should not be construed as a guarantee of specific product properties or their suitability.
- We reserve the right to make any changes in light of technological advancements and business developments.
- In accordance with applicable laws, we assume no liability for the intellectual property rights of third parties.
- The use and application of our products based on our application recommendations are beyond our control and are the sole responsibility of the user. The user is obligated to verify that the product is suitable for its intended use.