- As an initiator for the polymerization or copolymerization of ethylene, styrene, and acrylates and methacrylates.
- Used as an activator for flame-retardant polystyrene.
- Primarily used for high-temperature curing of unsaturated polyesters and vinyl ester resins.
- Active oxygen content: 8.76–8.99%
- Appearance: Clear liquid
- Content: 79.0–81.0%
- Color: Not exceeding 50 Pt-Co
- Density (20°C): Approximately 0.85 g/cm³
- Organic peroxides are thermally unstable substances and may undergo self-accelerating decomposition.
- The self-accelerating decomposition temperature (SADT) is 55°C.
- The recommended storage temperature should not exceed 30°C.
- Under recommended storage conditions, Trigonox 122-CH80 remains within specifications for at least 3 months after delivery.
- Trigonox 122-CH80 is packaged in non-returnable 5-gallon polyethylene containers with a net weight of 35 pounds.
- Packaging and shipping comply with international regulations.
- Keep the container tightly closed.
- Store and handle Trigonox 122-CH80 in a dry, well-ventilated area, away from heat sources, ignition sources, and direct sunlight.
- Avoid contact with reducing agents (such as amines), acids, alkalis, and heavy metal compounds (such as accelerators, driers, and metal soaps).
- The Safety Data Sheet (SDS) provides detailed information on the safe storage, use, and handling of Trigonox 122-CH80.
- carbon dioxide, cyclohexanone, hexanoic acid, methyl hexanoate, etc.
- The information and recommendations provided are given in good faith but without warranty.
- Users should determine for themselves, through preliminary testing or other means, whether this product is suitable for their intended purpose.
- This information supersedes all previously published information on this subject.