SWANCOR 975 is a tackifiable, bisphenol A based vinyl ester resin for SMC (Sheet Molding Compound), BMC (Bulk Molding Compound) and HSMC (High Strength Molding Compound). It has excellent chemical resistance and mechanical properties. It has been widely used in sports equipment, automotive parts and corrosion resistant materials.
norm
exterior condition | Light Yellow Liquid |
solid | 56.5±1.5% |
Viscosity*1 | 2950±450cps |
acid value | 23±5mgKOH/g |
SPI Gelation Time*2 | 27±7 minutes |
retention period | 4 months (below 25 °C) |
*2 98%BPO: 1.0%, 82°C
Casting body performance (4mm pure resin casting plate)*3
tensile strength | 68-89 MPa | iso 527-2 / gb/t 2567 |
tensile modulus | 2.7-3.4 GPa | iso 527-2 / gb/t 2567 |
Elongation at break | 5-7% | iso 527-2 / gb/t 2567 |
bending strength | 102-123 MPa | iso 178 / gb/t 2567 |
bending modulus | 2.7-3.4 GPa | iso 178 / gb/t 2567 |
heat distortion temperature | 110-115°C | iso 75 / gb/t 1634 |
Volume shrinkage | 8-9% | ISO 3521 |
Barcol hardness | 30-40 | GB/T 3854 |
Packaging, Storage and Handling
- SWANCOR 975 is available in 55 gallon drums weighing 200kg each or in 5 gallon drums weighing 20kg each.
- SWANCOR 975 is a cloudy, layered liquid. Stir well before use.
- Store in a cool place and keep out of direct sunlight.
- Flammable liquids, keep away from sources of ignition.